9 Quick Tricks to Become an Awesome Electrician

tool 2766835 1920

Being an electrician is a job that can turn into a lifelong career. It combines a love of science, a good amount of creativity and the technical know-how to really be able to help people on a day-to-day basis. Plus, you never have to worry about being without work – there’s always something electrical that needs fixing!

If you’re interested in becoming an electrician, here are 9 quick tricks to help you get started on your journey!

  1. It is important to know your tools and their applications while maintaining safety at all times

Remember that safety comes first before anything else. You want to be safe when you work on electrical projects so always wear rubber gloves while you’re working on electricity. Also it is good practice not to turn power on until you are ready, but if you must turn it on make sure to use a voltage tester.

  1. When doing any kind of electrical job, always remember to disconnect the power from whatever circuit you are working on.

In order to do that, just locate your main panel box and switch off all the breakers before beginning any sort of work .

  1. If you’re new to electrical work and using a multi-meter, it’s good practice not to check for current with the circuit powered.

Instead put your meter on volts or ohms depending on what you are checking so that the circuit isn’t live while you take measurements.

  1. Always read all of the directions before beginning any sort of electrical job and make sure that you have all the tools needed to complete the task.

So long as you plan ahead of time, there should never be any problems with completing your work on schedule.

See more: https://ezcustomgifts.com/top-6-tips-to-consider-while-choosing-electricians/

  1. When using a power drill, it’s important to remember that they use AC current instead of DC current like most other tools.

The reason for this is because AC current is more efficient at doing work over longer distances. Also, when working with these types of power tools it’s best to have them plugged into a ground fault circuit interrupter outlet so that if you touch grounded metal while the power drill is still running, it won’t shock you.

  1. If working with AC current, it’s important to remember that you can’t see the live conductor.

This makes it very hard for new electricians to know which wire is hot and which one isn’t, but if you want to quickly identify a live conductor draw an imaginary line through the middle of the wire and then cut that line in half down the middle with a sharp object. If the conductor is live, it will be a bright color like orange or yellow and if it isn’t live it will be a darker color like blue or green.

  1. When working on household wiring, you want to make sure that you place your wire nuts inside of a electrical box before screwing them into place to make sure that there is enough room for the wires to fit inside.

Also, it’s important to make sure that all of your connections are strong and sturdy once you’re done wiring something together.

  1. Before installing any appliances or fixtures in the home make sure to look at what type of wire they require.

If you were to install certain types of wire in places where they aren’t needed, you risk short circuiting the wires and causing a fire. The type of wire that’s typically used for household wiring is NM cable or armored cable , but always read the directions on your appliances before installing them to make sure that everything will run smoothly.

See more: https://ezcustomgifts.com/on-the-job-tips-for-an-electricians/

  1. When going up ladders while working with electricity, it’s a good idea to avoid carrying anything in your hands so that you have more control over the ladder.

Also never go up or down a ladder unless it is secure and both of your feet are on the same step of the ladder.

In Conclusion

By following all of these tricks, you should be able to greatly improve your chances of completing any electrical project while staying safe and avoiding accidents. Remember that safety is number one when it comes to working on electricity so don’t get distracted or take shortcuts. Use these tips in order to become an awesome electrician who gets the job done right the first time.

Leave a Reply